Hover to Zoom

3 Way Dimmer 600W

No Longer Available
  • This dimmer works for fixtures with switches in two or three locations -- for example, you can install this dimmer by the front door and a regular three-way switch in an adjoining hallway. The top button acts as the on/off, while the bottom button rotates to adjust the light level. Push-button switches were installed in homes as early as 1891, and were the most popular type of switch through the 1920s. Though they were eventually phased out by the toggle switch in 1950s, there has been a resurgence of interest in using push buttons again.

    • Tip: Two dimmers will not fit side by side in an electrical box.
    • You can control the lights on a fan fixture with these switches, but not the fan speed.
    • Complete the look with our heavy-duty forged-brass Lewis switchplates and coverplates.
    • When ordering three-way switches you MUST have a mechanical three-way switch at one end of the circuit. There can only be one dimmer in a three-way circuit.
    • Dimmer functionality
    • UL listed
    • 120 volts/600 watts
    • Imported

    NOTES FOR USING DIMMERS WITH LED FIXTURES

    • Not all LED bulbs and fixtures are dimmable, and some dimmable LEDs will be incompatible with our switches.
    • When dimming multiple bulbs with one dimmer switch, all bulbs have to be the same dimmable bulb from the same manufacturer.
    • We observed the best results pairing this dimmer switch with CREE dimmable LED bulbs. These bulbs had smooth dimming throughout the dimming range, as low as 15% brightness, where other bulbs stopped dimming around 25% brightness.
    • We successfully tested bulbs from Utilitech, Phillips, Sylvania, EarthLED, and Fiet Electric. Customers have used our dimmers with LED bulbs and fixtures from Maxlite, Luminous, Halo, Nora Lighting, Juno, and DiodeLED. If you are uncertain of compatibility, we recommend you order a single dimmer and test it with the fixture you would like to use.