Bring classic details to your home with our vintage-inspired switches and dimmers. This elegant design features a satisfying metal toggle to turn on and off your lighting—effortlessly pairing traditional style with modern function.

Details You'll Appreciate

Vintage-inspired dimmers and switches
Crafted from solid brass or steel in your choice of finish
Custom curate a mix of dimmers and switches to suit your home

Product Specifications

Brass or steel
Toggle switches and dimmers are supplied as 3-way but work as single pole or 3-way
Dimmers function as ON/OFF button
Before ordering, it is important to make sure your junction boxes are recessed below the finished wall surface by at least 1/8”
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov

Care Instructions

Unlacquered Brass Finish: Will naturally patina; Wipe with a dry soft cloth. Heavy tarnish may require a brass polish to brighten.
Brushed Brass Plates: Brushed Brass plates are lacquered to preserve the finish without aging or patinating over time. (Brushed Brass is a non-living finish).
To clean, wipe the plates with a dry soft non-abrasive cloth to remove fingerprints. Do not use any strong metal cleaners or solvents, as this may compromise the lacquer on the plate. We strongly advise removing the plates before cleaning them, to avoid damaging the wall surface.
Nickel silver plates can normally be cleaned easily by using a soft, dry, non-abrasive, lint-free cloth. If, over time, nickel plates build up marks that do not wipe off easily, a Wadding Polish can be used to restore shine. Great care must be taken to avoid the residue from the polish coming into contact with the walls. We strongly advise removing the plates before cleaning them to avoid this and making sure all the residue has been polished off the plates before reinstating them.
Stainless steel plates can be cleaned by using a soft non-abrasive cloth with some stainless steel spray cleaner. Avoid getting the stainless steel spray cleaner on the walls as it will leave a dirty residue. We strongly advise removing the plates before cleaning them to avoid this and making sure all the residue has been polished off the plates before reinstating them.
The Antique Bronze range requires little cleaning but, if required, you can use a little WD40 on a soft non-abrasive cloth to clean dirty marks off them and bring the sheen of the finish back. Great care must be taken to avoid the oily residue from the WD40 coming into contact with the walls. We strongly advise removing the plates before cleaning them to avoid this and making sure all the residue has been polished off the plates before reinstating them.

Forbes & Lomax Toggle and Dimmer